DIY Electronics Message Board
Register  |   |   |  Latest Topics
 
 
 


Reply
  Author   Comment  
wtrk

Registered:
Posts: 2
Reply with quote  #1 
[L4XW90] 
__________________
Testing now
Frank

Moderator
Registered:
Posts: 1,889
Reply with quote  #2 
Use previous version of Microbrn - P18
temper999

Registered:
Posts: 3
Reply with quote  #3 
I recently bought a K150 from a chinese ebayer.
Now I am trying to get it to work.

I have installed the PL2303 USB-Serial drivers and get COM3.
After that I started the MicroBrn V25EP.
The K150 was recognised but under Protocol i get the "System missmatch" error.
Firmware is yyyy.

I have tried every MicroBrn version from v25EP to V7 (without v21, link down), but I always get "System missmatch".
Frank

Moderator
Registered:
Posts: 1,889
Reply with quote  #4 
You have a mismatch between the firmware on the board and the PC software.

I have no idea what version of software you should be using because I don't know what firmware version is on the board. Given that it is a pirate copy of the DIY programmer I suggest you ask the chinese ebayer for their help.
temper999

Registered:
Posts: 3
Reply with quote  #5 
Thx for the feedback.
I am still waiting for a feedback from the chinese ebayer.
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Thank you for visiting.